Loading Events
Find Events

Event Views Navigation

Upcoming Events

Events List Navigation

January 2019
$495

ISO 9001: 2015 Internal Auditor

Internal Auditor Training - Quality Management Systems (QMS) teaches you how to audit effectively while troubleshooting your organization for ISO 9000 Standard compliance. ISO 10011 (audit practices) is covered in detail, including planning, execution, reporting, and follow-up. Those interested in managing, conducting, or participating in internal audits should take this course. It will also assist individuals wishing to become ISO registered by identifying those areas an external auditor will assess. Topics: Introduction Review of the quality specification requirements Objectives of an audit and the auditor's role in the audit Planning an audit Conducting an audit Recording non-conformances Developing an audit report Follow-up and corrective action reports Maintenance of a document trail Review and conclusions Practical application Who should attend? This course is designed to provide a comprehensive treatment of the ISO 9001:2015 standard so that internal auditor candidates can interpret the meaning of the standard and understand how to verify and validate a quality management system’s adherence to the standard. Additionally, it instructs learners on how to conduct an audit and how to report (write) the findings of an audit. Since this course provides a complete overview of the ISO 9001:2015 quality management system standard, it is completely suitable for managers who require in-depth understanding of both the letter as well as the spirit of the standard.

Find out more »
15January
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$675

Principles of Ergonomics

The Principles of Ergonomics (OSHA #2255) course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer's ergonomic programs, and conduct ergonomic evaluations. Topics: Resources Health hazards Review/Analysis of risk factors Material handling NIOSH findings Upper limb disorders Office ergonomics Case studies Review/Analysis of proposed ergonomic standards Who should attend? Construction Industry Professionals Human Resource Professionals Facility Planners Safety Supervisors Retail Industry Transportation Industry Risk Managers Supervisors Health Industry Professionals

Find out more »
23January
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
February 2019
$473

Toyota Kata Domino Challenge

Toyota Kata addresses the question “How can we lead our companies so they will survive and thrive long term?” Since the future lies beyond what we can see, the solutions that we employ today may not continue to be effective. So it is not the solutions themselves – whether Lean techniques, today’s profitable product, or any other – that provide sustained competitive advantage, but rather the ability to understand conditions and create fitting, smart solutions. Toyota Kata is the routine to develop this capability in the organization, and is both a key factor in Toyota’s long-running success and a core responsibility of its leadership. Briefly put – Toyota Kata channels and utilizes the capabilities of all its members in order to strive for continuous improvement better than our traditional management methods. Join us for a “learn, share and do” opportunity. In this session you will learn … Hear and see how companies are utilizing the Toyota Kata methodology of the Improvement Kata and Coaching Kata to coach for daily continuous improvement. Review the Toyota Kata slide material covering: • The Improvement Kata: A scientific 4-step iterative PDCA routine that addresses only those obstacles which lie on the path of a trajectory that leads to the achievement of short term Target Conditions that are in line with a long term Vision/Challenge. • The Coaching Kata: A daily routine that utilizes The Five Questions to help teach the Improvement Kata thinking pattern and ensure that it is embedded within an organization via team accountability. • Participate in a multi-round simulation that is progressively interwoven in with the slide material to make it easy to understand how the Toyota Kata trajectory components come together (i.e., Vision/Challenge, Current Condition, Target Condition, Obstacles, PCDAs and Coaching).

Find out more »
20February
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$675

Electrical Standards

The Electrical Standards (OSHA #3095) course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment. Topics: Ampacity overcurrent Current, voltage and resistance Dielectric personal protective equipment Electrical fundamentals Electrical standards workshop Ohm's Law Polarity 1910.304 Standards relating to construction 1926.401-403 Standards relating to general industry 1910.301-303 Static electricity Who should attend? Electricians Construction Industry Building Maintenance Personnel Facility Managers Agriculture Industry Professionals Contractor and Manufacturing Personnel Safety Supervisors Building Inspectors

Find out more »
26February
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
March 2019
$3,990
industry lean training class

Lean Six Sigma Green Belt SPRING 2019

Participants in the Lean Six Sigma Green Belt course learn many of the same tools and methods covered in the Black Belt course. Instructors focus on the most important techniques and skills to enable Green Belts to solve basic problems and get sustainable project results. This course is recognized by our customers for its superior practicality. As with the Black Belt certification, a two instructor approach is used along with extensive simulations and case studies.

Find out more »
04March
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$795

OSHA Guide to Industrial Hygiene

The OSHA Guide to Industrial Hygiene (OSHA #521) course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement. Topics: Bloodborne pathogens OSHA health standards Respiratory protection Hazard communication Personal Protective Equipment (PPE) Air contaminant standards Detector tubes Noise standards Asbestos standards Recordkeeping Elements of a workplace health program Confined space Ventilation Ergonomics Permissible exposure limits Engineering controls OSHA sampling procedures and strategy Who should attend? Industrial Hygienists Safety Professionals Environmental Professionals Occupational Health Professionals Building Inspectors Hazardous Waste Managers

Find out more »
26March
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
April 2019
$675

Fall Protection

The Fall Protection (OSHA #3115) course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans. Topics: Fall prevention Principles of fall protection Components of fall arrest systems OSHA policies regarding fall protection Limitations of fall arrest equipment Who should attend? Construction industry personnel Tree trimming personnel Window washer personnel Maintenance personnel Painters Municipal employees Utility personnel Roofing personnel Safety supervisors Inspectors Safety Consultants Contractors

Find out more »
23April
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
May 2019
$675

Respiratory Protection

The Respiratory Protection (OSHA #2225) course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards. Topics: Terminology OSHA and ANSI standards NIOSH certifications Medical evaluation recommendations Program administration Cleaning and maintenance Air quality and contaminants Quantitative fitting SCBAs Selection, Inspection, and Special Problems 29 CFR 1910.134 and other regulations CPL 2.103 Who should attend? Construction Industry Professionals Safety Supervisors Hazardous Material Managers Risk Managers Maintenance Supervisors Health Industry Professionals

Find out more »
21May
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
June 2019
$650

Permit Required Confined Space Entry

The Permit-Required Confined Space Entry (OSHA #2264) course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation, and program development. Upon course completion students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standard, conduct atmospheric testing, and implement a permit-required confined space program. Topics: Atmospheric testing equipment Calculations and techniques Creating/Administering a PRCS Program Discussion of CFRs 1910 and 1926 Hazards with confined space entry Limitations related to equipment OSHA Standards for Confined Space Entry Personal Protective Equipment (PPE) Who should attend? First Responders Search and Rescue Industrial Hygienists Supervisors and Managers Inspectors Consultant Maintenance personnel Construction industry personnel Utility industry personnel Building management personnel Maintenance personnel Municipal Services personnel Safety & Health professionals Consultants Contractors

Find out more »
18June
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
July 2019
$400

Introduction to Incident Investigation

The Introduction to Incident Investigation (OSHA #7505) course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion, students will have the basic skills necessary to conduct an effective accident investigation at the workplace. Topics: Primary reasons for conducting an accident investigation Employer responsibilities related to workplace accident investigations Six-step accident investigation procedure Who should attend? Construction Industry Professionals Oil & Gas Industry Professionals Operations Personnel Supervisor or Manager Industrial Hygienists Safety Industry Professionals Consultants Inspectors Small Business Owners Human Resources Industry Professionals responsible for workers compensation issues Employer or Employee Representative who serves on an Accident Investigation Team, Union Representative, or Management Team, who could be involved in conducting accident and/or near-miss investigations

Find out more »
16July
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
+ Export Events