Loading Events
Find Events

Event Views Navigation

Upcoming Events › Training

Events List Navigation

September 2018
$650

Occupational Safety & Health Standards For the General Industry

The Occupational Safety and Health Standards for General Industry (OSHA #511) course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program. Topics: Recordkeeping Subpart D - Walking/Working surfaces Subpart E - Exit routes, emergency action plans, fire prevention plans Subpart I - Personal Protective Equipment Subpart J - Permit Required Confined Space Subpart L - Fire Protection Subpart N - Materials Handling Subpart O - Machine Guarding Subpart S - Electrical Who should attend? Industrial Hygienists Safety Supervisors Building Inspectors Hazardous Waste Managers

Find out more »
25September
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
October 2018
$3,990
industry lean training class

Lean Six Sigma Green Belt FALL 2018

Participants in the Lean Six Sigma Green Belt course learn many of the same tools and methods covered in the Black Belt course. Instructors focus on the most important techniques and skills to enable Green Belts to solve basic problems and get sustainable project results. This course is recognized by our customers for its superior practicality. As with the Black Belt certification, a two instructor approach is used along with extensive simulations and case studies.

Find out more »
01October
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$495

ISO 9001: 2015 Internal Auditor

Internal Auditor Training - Quality Management Systems (QMS) teaches you how to audit effectively while troubleshooting your organization for ISO 9000 Standard compliance. ISO 10011 (audit practices) is covered in detail, including planning, execution, reporting, and follow-up. Those interested in managing, conducting, or participating in internal audits should take this course. It will also assist individuals wishing to become ISO registered by identifying those areas an external auditor will assess. Topics: Introduction Review of the quality specification requirements Objectives of an audit and the auditor's role in the audit Planning an audit Conducting an audit Recording non-conformances Developing an audit report Follow-up and corrective action reports Maintenance of a document trail Review and conclusions Practical application Who should attend? This course is designed to provide a comprehensive treatment of the ISO 9001:2015 standard so that internal auditor candidates can interpret the meaning of the standard and understand how to verify and validate a quality management system’s adherence to the standard. Additionally, it instructs learners on how to conduct an audit and how to report (write) the findings of an audit. Since this course provides a complete overview of the ISO 9001:2015 quality management system standard, it is completely suitable for managers who require in-depth understanding of both the letter as well as the spirit of the standard.

Find out more »
09October
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$680

Hazardous Materials

The Hazardous Materials (OSHA #2015) course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials. Topics: Compliance issues 29 CFR 1910 Subpart H Introduction to hazardous materials Classification tanks and piping Compressed and liquefied petroleum gases Spray finishing Dip tanks Hazardous waste operations and emergency response (HAZWOPER) Cryogenics Confined space entry Process safety management Who should attend? Safety & health industry professionals Industrial hygienists Inspectors, logistics, and operations personnel Construction industry professionals Oil & Gas industry professionals Hazardous waste personnel Warehouse personnel Manufacturing personnel Freight terminal personnel Welding industry professionals Waste disposal personnel Industrial plant professionals

Find out more »
30October
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
November 2018
$650

Machinery and Machine Guarding Standards

The Machinery and Machine Guarding Standards (OSHA #2045) course covers the various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), guarding of portable powered tools, and common OSHA machine guarding violations. Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops. Upon course completion students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safeguards. Topics: Robotics Lockout/tagout (1910.147) Woodworking (1910.213) Abrasive wheels (1910.215) Mills/calendars (1910.216) Power presses (1910.217) Forging (1910.218) Power transmission (1910.219) Subpart O - Machinery and machine guarding Subpart P - Hand and portable power tools Who should attend? Safety Professional Supervisors Construction Industry Managers Machinists Inspectors

Find out more »
13November
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
December 2018
$473

Toyota Kata Domino Challenge

This one (1) day workshop (lunch provided) teaches participants how to deploy both the improvement and coaching kata within an organization. The workshop provides a treatment of the Toyota kata’s theoretical framework as well as its practical application. The theoretical rationale for the Toyota Kata includes a preference for the use of the scientific method, the use of deliberate practice in the development or transitioning of mental models, and the deployment of organizational continuous improvement. The practical application includes how data is collected for determining the current condition (diagraming, process characteristics, process metrics, and outcome metrics), and the development of a target condition. Workshop content also includes determining obstacles and the cycling of PDCA (plan, do check, act) experiments. The workshop is not a simulation of any business process but is rather a demonstration of how the Toyota Kata applies to confronting challenging situations, including continuous improvement. Topics: Cognitive drivers Current condition determination Target condition development PDCA experimentation Aligning factors   Objectives: Upon completion of the workshop, the participants should be able to: Conduct a daily improvement kata Understand the importance of coaching Distinguish organizational goals from value stream challenges, process target conditions, and local obstacles.

Find out more »
04December
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
January 2019
$675

Principles of Ergonomics

The Principles of Ergonomics (OSHA #2255) course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer's ergonomic programs, and conduct ergonomic evaluations. Topics: Resources Health hazards Review/Analysis of risk factors Material handling NIOSH findings Upper limb disorders Office ergonomics Case studies Review/Analysis of proposed ergonomic standards Who should attend? Construction Industry Professionals Human Resource Professionals Facility Planners Safety Supervisors Retail Industry Transportation Industry Risk Managers Supervisors Health Industry Professionals

Find out more »
23January
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
February 2019
$675

Electrical Standards

The Electrical Standards (OSHA #3095) course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment. Topics: Ampacity overcurrent Current, voltage and resistance Dielectric personal protective equipment Electrical fundamentals Electrical standards workshop Ohm's Law Polarity 1910.304 Standards relating to construction 1926.401-403 Standards relating to general industry 1910.301-303 Static electricity Who should attend? Electricians Construction Industry Building Maintenance Personnel Facility Managers Agriculture Industry Professionals Contractor and Manufacturing Personnel Safety Supervisors Building Inspectors

Find out more »
26February
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
March 2019
$795

OSHA Guide to Industrial Hygiene

The OSHA Guide to Industrial Hygiene (OSHA #521) course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement. Topics: Bloodborne pathogens OSHA health standards Respiratory protection Hazard communication Personal Protective Equipment (PPE) Air contaminant standards Detector tubes Noise standards Asbestos standards Recordkeeping Elements of a workplace health program Confined space Ventilation Ergonomics Permissible exposure limits Engineering controls OSHA sampling procedures and strategy Who should attend? Industrial Hygienists Safety Professionals Environmental Professionals Occupational Health Professionals Building Inspectors Hazardous Waste Managers

Find out more »
26March
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
April 2019
$675

Fall Protection

The Fall Protection (OSHA #3115) course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans. Topics: Fall prevention Principles of fall protection Components of fall arrest systems OSHA policies regarding fall protection Limitations of fall arrest equipment Who should attend? Construction industry personnel Tree trimming personnel Window washer personnel Maintenance personnel Painters Municipal employees Utility personnel Roofing personnel Safety supervisors Inspectors Safety Consultants Contractors

Find out more »
23April
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
+ Export Events