Loading Events
Find Events

Event Views Navigation

Past Events › Training

Events List Navigation

August 2019
$295

Bloodborne Pathogens Exposure Control for Healthcare Facilities

The Bloodborne Pathogen Exposure Control for Healthcare Facilities (OSHA #7200) course covers the development and implementation of Exposure Control Plans (ECP) for healthcare facilities. Course topics include understanding the OSHA Bloodborne Pathogens Standard, determining potential exposure and methods of control, developing an ECP, vaccinations, exposure incidents, training, and record keeping. The target audience is the program administrator, manager, or other personnel designated with the responsibility of developing a Bloodborne Pathogens ECP for a healthcare facility. Course highlights include students developing a template for their facility's ECP. Upon course completion, students will have the ability to take a step-by-step approach in developing an ECP for their healthcare facility while utilizing the OSHA Bloodborne Pathogens Standard as a reference. Topics: Control methods Exposure Control Plans Exposure determination methods Introduction to standard Medical requirements Recordkeeping Training requirements Who should attend? Industrial Hygienists Safety Industry Supervisors Hazardous Waste Managers Program Administrators First responders Healthcare Facility personnel Managers VPP Program Managers VPP Auditors

Find out more »
22August
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
September 2019
$650

Occupational Safety & Health Standards For the General Industry

The Occupational Safety and Health Standards for General Industry (OSHA #511) course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program. Topics: Recordkeeping Subpart D - Walking/Working surfaces Subpart E - Exit routes, emergency action plans, fire prevention plans Subpart I - Personal Protective Equipment Subpart J - Permit Required Confined Space Subpart L - Fire Protection Subpart N - Materials Handling Subpart O - Machine Guarding Subpart S - Electrical Who should attend? Industrial Hygienists Safety Supervisors Building Inspectors Hazardous Waste Managers

Find out more »
17September
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
October 2019
$680

Hazardous Materials

The Hazardous Materials (OSHA #2015) course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials. Topics: Compliance issues 29 CFR 1910 Subpart H Introduction to hazardous materials Classification tanks and piping Compressed and liquefied petroleum gases Spray finishing Dip tanks Hazardous waste operations and emergency response (HAZWOPER) Cryogenics Confined space entry Process safety management Who should attend? Safety & health industry professionals Industrial hygienists Inspectors, logistics, and operations personnel Construction industry professionals Oil & Gas industry professionals Hazardous waste personnel Warehouse personnel Manufacturing personnel Freight terminal personnel Welding industry professionals Waste disposal personnel Industrial plant professionals

Find out more »
15October
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
November 2019
$650

Machinery and Machine Guarding Standards

The Machinery and Machine Guarding Standards (OSHA #2045) course covers the various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), guarding of portable powered tools, and common OSHA machine guarding violations. Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops. Upon course completion students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safeguards. Topics: Robotics Lockout/tagout (1910.147) Woodworking (1910.213) Abrasive wheels (1910.215) Mills/calendars (1910.216) Power presses (1910.217) Forging (1910.218) Power transmission (1910.219) Subpart O - Machinery and machine guarding Subpart P - Hand and portable power tools Who should attend? Safety Professional Supervisors Construction Industry Managers Machinists Inspectors

Find out more »
19November
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
January 2020
$675

Principles of Ergonomics

The Principles of Ergonomics (OSHA #2255) course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer's ergonomic programs, and conduct ergonomic evaluations. Topics: Resources Health hazards Review/Analysis of risk factors Material handling NIOSH findings Upper limb disorders Office ergonomics Case studies Review/Analysis of proposed ergonomic standards Who should attend? Construction Industry Professionals Human Resource Professionals Facility Planners Safety Supervisors Retail Industry Transportation Industry Risk Managers Supervisors Health Industry Professionals

Find out more »
28January
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
February 2020
$675

Electrical Standards

The Electrical Standards (OSHA #3095) course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion, students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment. Topics: Ampacity overcurrent Current, voltage and resistance Dielectric personal protective equipment Electrical fundamentals Electrical standards workshop Ohm's Law Polarity 1910.304 Standards relating to construction 1926.401-403 Standards relating to general industry 1910.301-303 Static electricity Who should attend? Electricians Construction Industry Building Maintenance Personnel Facility Managers Agriculture Industry Professionals Contractor and Manufacturing Personnel Safety Supervisors Building Inspectors

Find out more »
25February
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
April 2020
$675

Respiratory Protection

The Respiratory Protection (OSHA #2225) course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion, students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards. Topics: Terminology OSHA and ANSI standards NIOSH certifications Medical evaluation recommendations Program administration Cleaning and maintenance Air quality and contaminants Quantitative fitting SCBAs Selection, Inspection, and Special Problems 29 CFR 1910.134 and other regulations CPL 2.103 Who should attend? Construction Industry Professionals Safety Supervisors Hazardous Material Managers Risk Managers Maintenance Supervisors Health Industry Professionals

Find out more »
21April
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
May 2020
$650

Permit Required Confined Space Entry

The Permit-Required Confined Space Entry (OSHA #2264) course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation, and program development. Upon course completion, students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standard, conduct atmospheric testing, and implement a permit-required confined space program. Topics: Atmospheric testing equipment Calculations and techniques Creating/Administering a PRCS Program Discussion of CFRs 1910 and 1926 Hazards with confined space entry Limitations related to equipment OSHA Standards for Confined Space Entry Personal Protective Equipment (PPE) Who should attend? First Responders Search and Rescue Industrial Hygienists Supervisors and Managers Inspectors Consultant Maintenance personnel Construction industry personnel Utility industry personnel Building management personnel Maintenance personnel Municipal Services personnel Safety & Health professionals Consultants Contractors

Find out more »
12May
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$473
domino challenge

Toyota Kata Domino Challenge

Toyota Kata addresses the question “How can we lead our companies so they will survive and thrive long term?” Since the future lies beyond what we can see, the solutions that we employ today may not continue to be effective. So it is not the solutions themselves – whether Lean techniques, today’s profitable product, or any other – that provide sustained competitive advantage, but rather the ability to understand conditions and create fitting, smart solutions. Toyota Kata is the routine to develop this capability in the organization, and is both a key factor in Toyota’s long-running success and a core responsibility of its leadership. Briefly put – Toyota Kata channels and utilizes the capabilities of all its members in order to strive for continuous improvement better than our traditional management methods. Join us for a “learn, share and do” opportunity. In this session you will learn … Hear and see how companies are utilizing the Toyota Kata methodology of the Improvement Kata and Coaching Kata to coach for daily continuous improvement. Review the Toyota Kata slide material covering: • The Improvement Kata: A scientific 4-step iterative PDCA routine that addresses only those obstacles which lie on the path of a trajectory that leads to the achievement of short term Target Conditions that are in line with a long term Vision/Challenge. • The Coaching Kata: A daily routine that utilizes The Five Questions to help teach the Improvement Kata thinking pattern and ensure that it is embedded within an organization via team accountability. • Participate in a multi-round simulation that is progressively interwoven in with the slide material to make it easy to understand how the Toyota Kata trajectory components come together (i.e., Vision/Challenge, Current Condition, Target Condition, Obstacles, PCDAs and Coaching).

Find out more »
20May
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
June 2020
$675

Fall Protection

The Fall Protection (OSHA #3115) course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion, students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans. Topics: Fall prevention Principles of fall protection Components of fall arrest systems OSHA policies regarding fall protection Limitations of fall arrest equipment Who should attend? Construction industry personnel Tree trimming personnel Window washer personnel Maintenance personnel Painters Municipal employees Utility personnel Roofing personnel Safety supervisors Inspectors Safety Consultants Contractors

Find out more »
09June
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
+ Export Events