Loading Events

← Back to Events

TMAC TEEX

713.357.4950|

Upcoming Events

September 2018
$650

Occupational Safety & Health Standards For the General Industry

The Occupational Safety and Health Standards for General Industry (OSHA #511) course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program. Topics: Recordkeeping Subpart D - Walking/Working surfaces Subpart E - Exit routes, emergency action plans, fire prevention plans Subpart I - Personal Protective Equipment Subpart J - Permit Required Confined Space Subpart L - Fire Protection Subpart N - Materials Handling Subpart O - Machine Guarding Subpart S - Electrical Who should attend? Industrial Hygienists Safety Supervisors Building Inspectors Hazardous Waste Managers

Find out more »
25September
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
October 2018
$3,990
industry lean training class

Lean Six Sigma Green Belt FALL 2018

Participants in the Lean Six Sigma Green Belt course learn many of the same tools and methods covered in the Black Belt course. Instructors focus on the most important techniques and skills to enable Green Belts to solve basic problems and get sustainable project results. This course is recognized by our customers for its superior practicality. As with the Black Belt certification, a two instructor approach is used along with extensive simulations and case studies.

Find out more »
01October
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$495

ISO 9001: 2015 Internal Auditor

Internal Auditor Training - Quality Management Systems (QMS) teaches you how to audit effectively while troubleshooting your organization for ISO 9000 Standard compliance. ISO 10011 (audit practices) is covered in detail, including planning, execution, reporting, and follow-up. Those interested in managing, conducting, or participating in internal audits should take this course. It will also assist individuals wishing to become ISO registered by identifying those areas an external auditor will assess. Topics: Introduction Review of the quality specification requirements Objectives of an audit and the auditor's role in the audit Planning an audit Conducting an audit Recording non-conformances Developing an audit report Follow-up and corrective action reports Maintenance of a document trail Review and conclusions Practical application Who should attend? This course is designed to provide a comprehensive treatment of the ISO 9001:2015 standard so that internal auditor candidates can interpret the meaning of the standard and understand how to verify and validate a quality management system’s adherence to the standard. Additionally, it instructs learners on how to conduct an audit and how to report (write) the findings of an audit. Since this course provides a complete overview of the ISO 9001:2015 quality management system standard, it is completely suitable for managers who require in-depth understanding of both the letter as well as the spirit of the standard.

Find out more »
09October
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$680

Hazardous Materials

The Hazardous Materials (OSHA #2015) course covers OSHA General Industry Standards and other consensus and proprietary standards that relate to the use of hazardous materials. Course topics include flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping, and use of electrical equipment in hazardous locations are also discussed. Upon course completion students will have the ability to assess compliance with OSHA hazardous materials standards, determine hazardous (classified) locations, and proper moving, storing, and handling of hazardous materials. Topics: Compliance issues 29 CFR 1910 Subpart H Introduction to hazardous materials Classification tanks and piping Compressed and liquefied petroleum gases Spray finishing Dip tanks Hazardous waste operations and emergency response (HAZWOPER) Cryogenics Confined space entry Process safety management Who should attend? Safety & health industry professionals Industrial hygienists Inspectors, logistics, and operations personnel Construction industry professionals Oil & Gas industry professionals Hazardous waste personnel Warehouse personnel Manufacturing personnel Freight terminal personnel Welding industry professionals Waste disposal personnel Industrial plant professionals

Find out more »
30October
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
November 2018
$650

Machinery and Machine Guarding Standards

The Machinery and Machine Guarding Standards (OSHA #2045) course covers the various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), guarding of portable powered tools, and common OSHA machine guarding violations. Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops. Upon course completion students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safeguards. Topics: Robotics Lockout/tagout (1910.147) Woodworking (1910.213) Abrasive wheels (1910.215) Mills/calendars (1910.216) Power presses (1910.217) Forging (1910.218) Power transmission (1910.219) Subpart O - Machinery and machine guarding Subpart P - Hand and portable power tools Who should attend? Safety Professional Supervisors Construction Industry Managers Machinists Inspectors

Find out more »
13November
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
January 2019
$675

Principles of Ergonomics

The Principles of Ergonomics (OSHA #2255) course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer's ergonomic programs, and conduct ergonomic evaluations. Topics: Resources Health hazards Review/Analysis of risk factors Material handling NIOSH findings Upper limb disorders Office ergonomics Case studies Review/Analysis of proposed ergonomic standards Who should attend? Construction Industry Professionals Human Resource Professionals Facility Planners Safety Supervisors Retail Industry Transportation Industry Risk Managers Supervisors Health Industry Professionals

Find out more »
23January
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
February 2019
$675

Electrical Standards

The Electrical Standards (OSHA #3095) course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment. Topics: Ampacity overcurrent Current, voltage and resistance Dielectric personal protective equipment Electrical fundamentals Electrical standards workshop Ohm's Law Polarity 1910.304 Standards relating to construction 1926.401-403 Standards relating to general industry 1910.301-303 Static electricity Who should attend? Electricians Construction Industry Building Maintenance Personnel Facility Managers Agriculture Industry Professionals Contractor and Manufacturing Personnel Safety Supervisors Building Inspectors

Find out more »
26February
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
March 2019
$795

OSHA Guide to Industrial Hygiene

The OSHA Guide to Industrial Hygiene (OSHA #521) course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological and ergonomic hazards, Permissible Exposure Limits (PEL), OSHA health standards, respiratory protection, engineering controls, OSHA sampling protocols and strategies, and workplace health program elements. The course features workshops in health hazard recognition, OSHA health standards and use of sampling equipment. Upon course completion students will have the ability to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine methods for hazard control and abatement. Topics: Bloodborne pathogens OSHA health standards Respiratory protection Hazard communication Personal Protective Equipment (PPE) Air contaminant standards Detector tubes Noise standards Asbestos standards Recordkeeping Elements of a workplace health program Confined space Ventilation Ergonomics Permissible exposure limits Engineering controls OSHA sampling procedures and strategy Who should attend? Industrial Hygienists Safety Professionals Environmental Professionals Occupational Health Professionals Building Inspectors Hazardous Waste Managers

Find out more »
26March
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
April 2019
$675

Fall Protection

The Fall Protection (OSHA #3115) course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods. Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program. Upon course completion students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans. Topics: Fall prevention Principles of fall protection Components of fall arrest systems OSHA policies regarding fall protection Limitations of fall arrest equipment Who should attend? Construction industry personnel Tree trimming personnel Window washer personnel Maintenance personnel Painters Municipal employees Utility personnel Roofing personnel Safety supervisors Inspectors Safety Consultants Contractors

Find out more »
23April
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
May 2019
$675

Respiratory Protection

The Respiratory Protection (OSHA #2225) course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards. Topics: Terminology OSHA and ANSI standards NIOSH certifications Medical evaluation recommendations Program administration Cleaning and maintenance Air quality and contaminants Quantitative fitting SCBAs Selection, Inspection, and Special Problems 29 CFR 1910.134 and other regulations CPL 2.103 Who should attend? Construction Industry Professionals Safety Supervisors Hazardous Material Managers Risk Managers Maintenance Supervisors Health Industry Professionals

Find out more »
21May
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
June 2019
$650

Permit Required Confined Space Entry

The Permit-Required Confined Space Entry (OSHA #2264) course covers the safety and health hazards associated with permit-required confined space entry. Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course features workshops on permit entry classification, instrumentation, and program development. Upon course completion students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standard, conduct atmospheric testing, and implement a permit-required confined space program. Topics: Atmospheric testing equipment Calculations and techniques Creating/Administering a PRCS Program Discussion of CFRs 1910 and 1926 Hazards with confined space entry Limitations related to equipment OSHA Standards for Confined Space Entry Personal Protective Equipment (PPE) Who should attend? First Responders Search and Rescue Industrial Hygienists Supervisors and Managers Inspectors Consultant Maintenance personnel Construction industry personnel Utility industry personnel Building management personnel Maintenance personnel Municipal Services personnel Safety & Health professionals Consultants Contractors

Find out more »
18June
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
July 2019
$400

Introduction to Incident Investigation

The Introduction to Incident Investigation (OSHA #7505) course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six-step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion, students will have the basic skills necessary to conduct an effective accident investigation at the workplace. Topics: Primary reasons for conducting an accident investigation Employer responsibilities related to workplace accident investigations Six-step accident investigation procedure Who should attend? Construction Industry Professionals Oil & Gas Industry Professionals Operations Personnel Supervisor or Manager Industrial Hygienists Safety Industry Professionals Consultants Inspectors Small Business Owners Human Resources Industry Professionals responsible for workers compensation issues Employer or Employee Representative who serves on an Accident Investigation Team, Union Representative, or Management Team, who could be involved in conducting accident and/or near-miss investigations

Find out more »
16July
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$295

Introduction to Safety and Health Management

The Introduction to Safety and Health Management (OSHA #7500) course covers the effective implementation of a company's safety and health management system. The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element's proper management. This course is an interactive training session focusing on class discussion and workshops. Upon course completion, students will have the ability to evaluate, develop, and implement an effective safety and health management system for their company. Topics: Hazard Prevention and Control Management Leadership and Employee Involvement Overview of a Safety and Health Management System Program Evaluation Safety and Health Training Worksite Analysis Who should attend? Employers Personnel responsible for the development of a safety and health program or system Personnel charged with improving safety and health in the workplace

Find out more »
18July
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$225

Recordkeeping Rules Seminar

The Recordkeeping Rule Seminar (OSHA #7845) course covers Occupational Safety and Health Administration (OSHA) requirements for maintaining and posting records of occupational injuries and illnesses, and reporting specific cases to OSHA. Upon course completion students will have the ability to identify OSHA requirements for recordkeeping, posting and reporting and to complete OSHA Form 300 Log of Work-Related Injuries and Illnesses, OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and OSHA Form 301 Injury and Illness Incident Report. Topics: Specific OSHA recordkeeping requirements Exceptions to exemptions for small employers and employers in low-hazard industries Mechanics of OSHA recordkeeping Location, retention and maintenance of records Maintenance of the log (OSHA No. 300) Deciding if work-related injuries are recordable Lost workday cases, reporting fatalities and multiple hospitalizations Penalties for failure to comply with recordkeeping obligations Who should attend? Employers with 11 or more employees Industrial Hygienists Safety Supervisors Building Inspectors

Find out more »
19July
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
August 2019
$675

Medic First Aid & CPR Trainer

The Medic First Aid and CPR Instructor course will qualify attendees to provide training in the application and use of First Aid, CPR, and Automated External Defibrillators on both adults and children in addition to providing information on preventing disease from blood borne pathogens. Participants will be provided all materials needed for instruction and will be taught to use lifesaving skills to include the proper use of CPR and first aid procedures. Topics: Automated External Defibrillators (AED) - Adult and Infant Bloodborne pathogens Infant Skills (CPR) and Child Skills (AED/CPR) Medic First Aid/Cardiopulmonary Resuscitation (CPR) Who should attend? EHS professionals Hospital and healthcare managers Department heads, directors, assistant directors, and senior medical staff Public health/health department personnel Local emergency management personnel First responders Others interested in teaching Medic First Aid and CPR awareness level training

Find out more »
20August
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
$295

Bloodborne Pathogens Exposure Control for Healthcare Facilities

The Bloodborne Pathogen Exposure Control for Healthcare Facilities (OSHA #7200) course covers the development and implementation of Exposure Control Plans (ECP) for healthcare facilities. Course topics include understanding the OSHA Bloodborne Pathogens Standard, determining potential exposure and methods of control, developing an ECP, vaccinations, exposure incidents, training, and record keeping. The target audience is the program administrator, manager, or other personnel designated with the responsibility of developing a Bloodborne Pathogens ECP for a healthcare facility. Course highlights include students developing a template for their facility's ECP. Upon course completion, students will have the ability to take a step-by-step approach in developing an ECP for their healthcare facility while utilizing the OSHA Bloodborne Pathogens Standard as a reference. Topics: Control methods Exposure Control Plans Exposure determination methods Introduction to standard Medical requirements Recordkeeping Training requirements Who should attend? Industrial Hygienists Safety Industry Supervisors Hazardous Waste Managers Program Administrators First responders Healthcare Facility personnel Managers VPP Program Managers VPP Auditors

Find out more »
22August
TMAC Training Center 1440 S Creek Dr #100
Houston, 77084 United States
+ Export Events